-
sizing help.
I have a 48 inch chest, what would be the recommended scaling for the fantasy breastplate. Dont want to sit here wasting ink and paper before I get close. Thanks.
-
3 Replies
-
There is more to sizing than just the chest circumference. I would recommend printing the default patter and doing a test fit. Then do some math to figure out the scaling for an approximate size for you, then print a second test fit. Adjust from there.
There is no, “you wear a medium size shirt so print at this scaling”. Everyone has a different size so you’re going to have to put in the time and resources to figure out what is going to work and fit for you.
Be sure to account for the thickness of the leather once you settle on a scaling.
-
when i printed the patter at 100 the front and back pieces of the chest came out to 22 in across when measured under the arm curve area hope this helps
-
I have a similar issue with the warrior belt. I had to double the length on the middle sides but not sure how to do that with the top and bottom of the sides… any suggestions?
Log in to reply.
